- Food
- Cosmetic products
- Thin media
- FLUX en-DE
- Products
- Drum and container pumps
- Drum pumps for various applications
Drum pump for hygienic applications
F 427 / FP 427
The Drum pump F/FP 427 is ideal for hygienic applications and suitable for conveying media out of drums, IBCs and other containers. It can be easily and quickly disassembled for cleaning / sterilization and can be completely stripped down to individual parts. The pump has minimal dead spots. The drive shaft, the inner and the outer tube are made of stainless steel (316 Ti resp. 1.4581). The pump is also available as FOOD and 3A certified version and complies with international safety standards.
Technical data:
- Flow rate: max. 240 l/min1
- Delivery head: max. 13 mwc2
- Viscosity: min. 1 mPas - max. 1000 mPas2
- Outer tube diameter: max. 43 mm
- Immersion length: 700, 1000, 1200
- Materials outer tube: Stainless steel
- Media / Fluids: Media with solid particles, Petroleum products, Thin media
- Seal: sealless in the liquid area
- Container: 1000 l IBC, 200 l drums
- 1 The maximum delivery rate is a test bench value, measured with water at 20 ° C at the pressure port of the pump, without accessories (hose, nozzle, flow meter). The practically achievable delivery rate is lower. It depends on the individual application, the fluid properties and the pump configuration. Please refer to technical data sheets / performance diagrams.
- 2 dependent on pump model, motor and medium
Product attributes
- Sealless in the liquid area
- Minimal dead spots
- Can be taken apart completely in only a few steps
- Disassembly almost without tools possible
- Radial shaft seals prevent the intrusion of vapours and liquid in the coupling area
- Simultaneous bearing of shaft and inner tube due to closed bearing
- Can be combined with various motors as required
Benefits
- Ideal as hygienic pump
- Can be quickly and easily taken apart for cleaning
- All parts in contact with the medium can be sterilized
- Transfers also fluids containing solids such as juices with pulp or soups with spices
- Available with different connection at the pressure side (e.g. Clamp 1 1/2" or RD 58x1/6)
- Available with 3A Certificate
- Available as FOOD version
- Appropriate for food contact acc. to EC 1935/2004 and FDA CFR 21
- Appropriate motors
Commutator motors
FEM 4070
Delivery rate max. 215 l/min
Delivery head max. 10 mwc
F 457 / F 457 EL
Delivery rate max. 220 l/min
Delivery head max. 12 mwcF 460 Ex / F 460 Ex EL
Delivery rate max. 200 l/min
Delivery head max. 9,5 mwc
F 458-1/ F 460-1 Ex
Delivery rate max. 220 l/min
Delivery head max. 12 mwc
Brushless Motor
FBM 4000 Ex
Delivery rate max. 220 l/min
Delivery head max. 11 mwc
Three-phase gear motor
F 414
Delivery rate max. 185 l/min
Delivery head max. 11 mwc
Compressed air motor
F 416 Ex / F 416-1 Ex / F 416-2 Ex
Delivery rate max. 240 l/min
Delivery head max. 13 mwcThe maximum delivery rate is a test bench value, measured with water at 20°C at the pressure port of the pump, without accessories (hose, nozzle, flow meter). The practically achievable delivery rate is lower. It depends on the individual application, the fluid properties and the pump configuration. Please refer to technical data sheets / performance diagrams. - Media examples
- Downloads